3DCeram C900 FLEX
С900 Flex 3D printer allows you to produce products with a high surface quality, the roughness of which does not exceed 2 microns.
Mechanical processing can be carried out at any intermediate stage. The parameter setting module has an open architecture, which makes it possible to use different materials. CERAMAKER 3D printer is equipped with modules of different size. This makes it possible to optimize the consumption of paste during printing. The model has gained wide popularity in the aircraft industry, chemical industry, medicine, watchmaking and jewelry, devices are used to produce complex electrical components.
- 3 sizes of building platform: 100 x 300 mm, 200 x 300 mm and 300 x 300 mm
- Free link technology
- SAM (Small Amount of Material) option : launch a fast printing run with only 100 mL of slurry
|3D Printer Dimensions||
1060 × 2250 × 2040 mm (41.73 × 88.6 × 80.31 inch)
300 × 300 × 100 mm (11.81 × 11.81 × 3.93 inch)
|Laser spot diameter|
|Optimum indoor operation temperature||
20-25 °C, 68-77°F
|Maximum room temperature variation||
6 bars dry
Ceraсleaner – Nitrogen kiln – Sintering furnace
|Client Operating System||