The mass production’s solution. The 3600 is the largest industrial printer in the 3DCeram product line with a build area of 600x600x300mm. The Ceramaker 3D printer allows you to produce products with high surface quality, the roughness of which does not exceed 2 microns.
The optimal solution for mass production. The 3600 is the largest industrial printer in the 3DCeram product line with a build area of 600x600x300mm. The Ceramaker 3D printer allows you to produce products with high surface quality, the roughness of which does not exceed 2 microns.
Mechanical processing can be carried out at any intermediate stage. The parameter setting module has an open architecture, which makes it possible to use different materials. The Ceramaker 3D printer is supplied with modules of different sizes. This makes it possible to optimize the consumption of paste during printing. Benefits Stereolithography (laser) Technology without support. Reduced production cost of 1 part Reduced cleaning time.
Why is 3D printing of ceramic products preferable to making them using traditional methods?
- Because of the quick ability to make constructive changes.
- The ability to manufacture products with a complex individual shape, including complex internal channels.
- Production of products with an individual composition of additives in the material. This allows you to achieve unique and necessary characteristics of products.
|3D Printer Dimensions||
2100 × 1800 × 2500 mm (82.67 × 70.86 × 98.42 inch)
600 × 300 × 600 mm (23.62 × 11.81 × 23.62 inch)
4 UV lasers
|Laser spot diameter|
|Optimum indoor operation temperature||
20-25 °C, 68-77°F
|Maximum room temperature variation||
6 bars dry
At a later stage
Cerakleaner. Cleaning device for removing unpolymerized paste. Module for removing the printing platform. Allows you to remove printed models from the build chamber and collect unpolymerized paste.
|Client Operating System||